A bidet toilet seat replaces your existing toilet seat and adds a retractable wand that washes with a stream of water, while a bidet toilet builds the same functions into the bowl itself. Both suit households that want less paper use, easier hygiene for older family members, or a warmer and more comfortable bathroom routine. This collection holds about 140 products, from basic seats to fully integrated smart toilets.
What Is in This Bidet Toilet Seat Collection
Close to half of the range is toilets, including one-piece and two-piece models with an integrated bidet, smart toilets with auto open and close lids, and comfort height bowls. Roughly a fifth is listed as combined toilets and bidets, and the rest covers standalone bidet seats, marine toilets for boats, accessories and a few toiletry bags.
List prices run per item and spread widely. A small number of accessories and simple seats start under $50, about a quarter of the range is under roughly $600, the middle of the collection sits around $1,250, and the upper quarter climbs past $2,400 for integrated smart toilets. The most feature-rich models reach close to $8,700. Roughly three quarters of the listings are currently shown in stock.
Browse the wider bathroom collection for everything that sits around the toilet, or the bathroom remodel page if you are planning a full renovation and want to choose fixtures together.
Bidet Seat or Toilet With Built-In Bidet?
The first decision is whether to keep the toilet you have.
- Bidet seat: bolts onto your current bowl through the same two seat holes and connects to the toilet's cold water supply with a T-valve. It is the lower cost route and can move with you if you change homes.
- Integrated bidet toilet: the bowl, tank or tankless flush system and wash functions are designed as one unit. Lines are cleaner, there is no visible gap between seat and bowl, and many models add automatic flushing, a night light and a self-cleaning wand. Installation means replacing the whole toilet.
- Non-electric attachments: a thin plate under your existing seat with a manual lever. They use only unheated supply water and have no heated seat, but they need no outlet at all.
If your current toilet is in good shape, a seat is usually the sensible choice. If the toilet is old, cracked or a water-wasting design, a toilet with built-in bidet and heated seat solves two problems in one install.
Electric Bidet Toilet Seat Features Worth Paying For
An electric bidet toilet seat needs power, and that power unlocks most of the comfort features. The ones that make the biggest daily difference:
- Warm water wash: either a small tank reservoir or an instantaneous heater. Tank models are simpler; instant heaters do not run out of warm water during long or back-to-back uses.
- Heated seat: adjustable temperature, often with an energy-saving mode. A bidet toilet heated seat is the feature most owners say they would not give up in winter.
- Warm air dryer and deodorizer: reduce or replace paper drying.
- Remote control: a remote control bidet toilet seat uses a wall-mounted or handheld remote frees the side panel and suits users with limited reach.
- Auto open and close lid, auto flush: found mainly on integrated smart toilets.
- Wand self-cleaning and adjustable spray: rear and front wash, oscillating or pulsating modes, and adjustable pressure and position.
Families of TOTO Washlet seats and toilets appear throughout the collection, alongside other smart toilet lines, so you can compare a TOTO bidet toilet seat against integrated models side by side.
Elongated vs Round Bowl Fit
Bowl shape is the most common reason a seat has to be returned. Measure from the center of the two seat bolt holes to the front edge of the bowl rim:
- Round bowls measure about 16.5 inches.
- Elongated bowls measure about 18.5 inches.
Many seats are sold in both sizes, so pick the matching version. An elongated bidet toilet seat on a round bowl will overhang, and a round seat on an elongated bowl leaves the front of the rim exposed. A few seats are marketed as universal, but check the listed dimensions against your bowl before ordering. Also note the bowl's width and the position of the tank: some bidet seats need a minimum distance between the bolt holes and the tank so the control body fits.
Installing a Bidet Toilet Seat: Power, Water and Rough-In
- Outlet: electric models need a grounded outlet within reach of the power cord, and it should be GFCI protected because it sits near water. If there is no outlet behind the toilet, plan for an electrician before the seat arrives.
- Water supply: shut off the supply valve, flush to empty the tank, and fit the included T-adapter between the shut-off valve and the tank fill line. The seat takes cold water and heats it itself.
- Mounting plate: remove the old seat, install the bracket in the bolt holes, then slide the seat on until it clicks.
- Test for leaks: open the valve slowly and check every connection before regular use.
For a full bidet toilet, also confirm the rough-in, the distance from the finished wall to the center of the floor drain. Most US homes have a 12-inch rough-in, but older houses can be 10 or 14 inches, and the toilet you buy must match it. Integrated smart toilets also need the outlet near the floor next to the toilet.
Care Tips for Smart Toilets and Washlet Seats
Wipe the seat and lid with a soft cloth and mild soap; harsh or abrasive cleaners can dull the plastic and damage the control panel. Run the wand cleaning cycle regularly and replace the inline water filter if your model has one. In homes with hard water, descaling the nozzle helps keep the spray even.
Pairing a new toilet with updated storage? See bathroom vanities to complete the room.
Bidet Toilets and Seats FAQ
What is the best bidet toilet seat for most homes?
For most homes the best bidet toilet seat is an electric model with warm water, a heated seat and adjustable spray position, sized to match the bowl. Choose instant water heating if several people use the toilet back to back. Add a remote control if the user has limited mobility or you want stored presets.
Do I need an outlet for an electric heated bidet toilet seat?
Yes. Heated seats, warm water and dryers all require power, so you need a grounded, GFCI-protected outlet within reach of the cord. If you have no outlet near the toilet, a non-electric bidet attachment works without power but only sprays unheated water.
Is there a round bidet toilet seat that is electric?
Yes, many electric seats come in a round version as well as elongated. Measure from the bolt holes to the front of the rim: around 16.5 inches means a round bowl, around 18.5 inches means elongated. Order the matching size rather than relying on a universal claim.
Can I get a toilet with built-in bidet and heated seat?
Yes. Integrated smart toilets in this collection combine the bowl, flush and bidet functions, and many include a heated seat, warm air dryer and auto open lid. They replace your whole toilet, so check the rough-in distance and outlet location first.
How hard is installing a bidet toilet seat yourself?
A seat is a common do-it-yourself job that usually needs only a screwdriver and an adjustable wrench. You shut off the water, add the T-adapter, mount the bracket and connect the hose. The only step that may need a professional is adding an outlet if none exists.