Skip to content
Black Friday

Deals through Nov 29

Shop +1 470-845-2793

Metal Mosaics

Sort by

View

Metal Mosaics: products

Load more

15 remaining

Metal mosaics are small-format tile assemblies that use metal alone or combine it with glass and stone. They are best suited to backsplashes, feature walls and decorative accents where sheen, texture and closely spaced pattern are intentional parts of the design.

This collection has about 40 products. Roughly three quarters use a 12x12 nominal sheet, while the remaining documented formats are close to that scale in varied dimensions. Gray and white are the leading colors, with brown and blue represented in smaller numbers. Glossy, matte, brushed and multi-finish surfaces appear across square, rectangular, penny, brick and interlocking looks.

Metal is specified on about 15 products, while many others combine glass, stone and metal in different proportions. Around 90% of the assortment is marked in stock. List prices span from about $7 to about $435 per listed item, and the middle half runs from roughly $7 to $170. Because an item may be a piece, box, set or another sales unit, compare coverage and package quantity before evaluating cost.

Where Metal Mosaics Work Best

A metal mosaic wall tile can introduce narrow highlights without covering an entire room in a reflective surface. Kitchen backsplashes, dry bar fronts, fireplace surrounds outside heat-restricted zones and bathroom feature walls are common possibilities. Five products are designated for floors, but wall suitability is far more common in the recorded specifications; never infer floor approval from appearance alone.

Scale matters. A nearly 12x12 sheet is easy to handle as a module, but the individual chips determine the visual rhythm. Small squares read as a regular grid, rectangles emphasize direction, and interlocking sheets can reduce obvious straight seams when aligned correctly. Lay several sheets together before installation to check repetition, sheet boundaries and color distribution.

Glass Metal Mosaic Tiles vs Stone-and-Metal Blends

  • Glass metal mosaic tiles mix reflective glass with metallic accents. Glass can intensify depth and color, but transparent pieces may require a uniform setting bed and manufacturer-approved mortar.
  • Stone and metal mosaic tile combines materials with different porosity and chemical sensitivity. Cleaning products must be safe for the most sensitive component, usually the natural stone.
  • All-metal or metal-forward mosaics concentrate the metallic effect. Check the actual metal or surface treatment because maintenance and wet-area suitability vary.

A glass metal mosaic can look different under cabinet lighting than it does in ambient daylight. Brushed surfaces scatter reflection, glossy pieces create sharper highlights, and multi-finish sheets alternate both effects. Gray and white blends are easier to coordinate with cool counters, while bronze, brown or gold accents tend to connect with warm wood and hardware.

For less reflective options, compare natural stone mosaic and marble mosaics. Porcelain mosaics can offer lower water absorption, while ceramic mosaics provide another manufactured-tile alternative. The parent mosaic collection brings the material groups together.

Planning Sheet Layout and Quantity

Measure each rectangular section and calculate its area, then separately record niches, returns and other small planes. Confirm the stated sheet dimensions and actual coverage because sheets close to 12 inches are not always exactly one square foot. Joint width, interlocking edges and chip spacing can change installed coverage.

Plan the layout from the visual center or the most important sightline. Check the size of cuts at both ends and adjust the starting point to avoid narrow slivers. At outlets and corners, identify whether a cut will pass through glass, stone, metal or several materials; each may require a different blade or technique.

Dry-lay sheets from multiple packages to distribute variation. Inspect the mesh and chip alignment, then trim or reposition individual pieces where sheet boundaries become visible. Maintain the designed spacing between sheets so the joint does not widen into a visible grid.

Installing Mixed-Material Mosaic Metal Tile

Follow the product and setting-material instructions for substrate, mortar, trowel size and grout. A flat substrate is critical because small chips follow surface irregularities. Apply sufficient mortar for contact without allowing it to squeeze excessively through the joints, and use a flat beating block rather than pressing individual pieces unevenly.

Cutting technique depends on the sheet composition. Glass can chip, natural stone can fracture along veins, and thin metal facings can deform or expose a cut edge. A professional tile installer should select tools and edge treatments after inspecting the product. Use trim or a planned termination where raw metal edges would otherwise remain visible.

Grout color changes the apparent pattern: a close match softens the grid, while contrast outlines every chip. Abrasive grout can scratch glossy glass or metal, so verify compatibility and test a spare piece. Some natural-stone components may need sealing before grouting to limit pigment absorption.

Can Metal Mosaic Tile Go in a Shower?

A metal mosaic tile in shower walls is appropriate only when the specific product is approved for that wet environment. Constant moisture, cleaning chemicals and mineral-rich water can affect metals or coatings, and mesh-mounted sheets require compatible adhesives. Product-level approval matters more than the collection name.

Do not assume that wall approval includes shower floors. Shower floors need suitable slip resistance, drainage geometry and durable wet-area installation. If a blend contains natural stone, avoid acidic cleaners; if it contains metal, avoid abrasive tools and chemicals prohibited by the manufacturer.

Cleaning Metallic Mosaic Tile

Start with warm water, a soft cloth and a mild pH-neutral cleaner approved for every material in the blend. Do not use steel wool, abrasive powder or acidic descalers unless the product instructions explicitly allow them. Drying reflective surfaces helps reduce water spotting.

For kitchen installations, wipe cooking oil and food residue promptly so deposits do not build up along the grout. Use a soft brush on grout joints without scrubbing metal faces aggressively. Seal only components that call for it; glass and many metal surfaces do not absorb sealer, while natural stone may.

Metal Mosaics FAQ

Are metallic mosaic tiles made from solid metal?

Some products use metal components, while others combine metal with glass or stone. A metallic appearance can also come from a surface treatment, so review the individual material specification before choosing cleaners or an installation location.

Can metal mosaic wall tile be used behind a stove?

It may be suitable when the product is approved for the location and clearances comply with the appliance requirements and local code. Confirm heat exposure, cleaning compatibility and substrate preparation for the exact tile.

How do you cut glass and metal mosaic tile?

The correct method depends on which material crosses the cut line. Glass-rated blades, metal-cutting tools or stone blades may be needed, and mixed sheets often benefit from separating chips before cutting. Test first because coatings and thin metal faces can be damaged.

Is a metallic mosaic suitable for floors?

Only products explicitly rated for floor use should be installed underfoot. This assortment is predominantly wall-oriented, and floor approval must account for wear, traction and the intended traffic level.

What grout works with stone and metal mosaic tile?

Use grout approved by the tile manufacturer and compatible with all components. Test for scratching and staining, especially with polished metal, glossy glass or porous stone, before grouting the full installation.

Why are the sheet joints visible after installation?

Visible joints usually result from inconsistent spacing between sheets, repeated color placement or misaligned interlocking edges. Dry layout, adjustment of individual chips and matching the within-sheet spacing can make the field more continuous.

Your cart (1 item)

Royal Shade 19' x 24' x 30.6' Green Triangle Sun Shade Sail
$333.98
Royal Shade 19' x 24' x 30.6' Green Triangle Sun Shade Sail

SPH-B0C2FXD88P

$333.98 / Piece
Piece
Subtotal $333.98

Taxes and shipping calculated at checkout

View cart

It's in your cart

Pairs well with it

Choose options