Skip to content
Black Friday

Deals through Nov 29

Shop +1 470-845-2793

Marble Slabs 2 cm

Sort by

View

2cm marble slabs are full-size sheets of marble about 3/4 inch thick, used mostly for bathroom vanities, backsplashes, shower and feature walls, tub decks and fireplace surrounds. This collection lists about 220 slabs in polished, honed and leathered finishes, and it suits homeowners, designers and fabricators planning vertical surfaces or lighter-weight countertops.

It sits within the wider marble slabs collection and the full range of stone slabs. Each listing shows its own stone name, finish and availability, so compare slabs individually.

2 cm vs 3 cm Marble: Thickness Trade-Offs

Marble slabs in the US are most often cut at 2 cm (about 3/4 inch) or 3 cm (about 1 1/4 inch). Neither is better overall; they suit different jobs. If your project is a kitchen countertop that sits directly on cabinets, compare these slabs with 3 cm marble slabs as well.

  • Weight: 2cm marble weighs roughly two-thirds as much as 3 cm stone, about 11 to 12 pounds per square foot versus around 16 to 18. That matters on walls, in upper-floor bathrooms and during handling.
  • Countertop support: 3 cm slabs usually sit directly on base cabinets. 2 cm slabs used as countertops are typically installed over a plywood substrate for support.
  • Edges: to look thicker, a 2 cm countertop edge is usually laminated, meaning a strip of stone is bonded under the edge to build up its profile.
  • Overhangs: thicker stone supports longer unsupported overhangs. With 2 cm, plan brackets or a substrate wherever the stone extends past its base.
  • Vertical use: for backsplashes, wall cladding, shower walls and fireplace surrounds, 2 cm is the usual choice because it is lighter and easier to anchor.

Where 2cm Marble Works Best

  • Marble vanity tops: bathroom counters are smaller and carry lighter loads than kitchen counters, so 2 cm stone is common there.
  • Full-height marble backsplash: a single slab running from counter to cabinet or ceiling shows the veining without grout lines.
  • Shower walls and tub decks: large panels reduce joints in wet areas; marble here needs sealing and gentle cleaners.
  • Fireplace surrounds and feature walls: lighter panels are easier to fix to framing and masonry.
  • Furniture and tabletops: coffee tables, side tables and shelving where weight matters.

Edges and Lamination on 2cm Countertops

When 2 cm marble is used for a counter, the fabricator chooses how the edge will read. A simple eased or rounded edge keeps the slim 3/4 inch profile, which suits modern vanities. A laminated edge bonds an extra strip beneath the front edge to create a thicker look. A mitered edge joins two pieces at a 45 degree angle so the veining wraps around the corner. Discuss the edge before templating, since it affects how much stone the job needs.

Polished, Honed and Leathered Finishes

Polished, honed and leathered surfaces appear most often in slab titles. Each changes how the stone looks and how it wears:

  • Polished marble is glossy and shows the deepest color and veining, but etch marks from acids show as dull spots on the shine.
  • Honed marble has a smooth matte surface that hides etching and fine scratches better, which is why it is popular for vanities and kitchens. See honed marble slabs for more options.
  • Leathered marble has a soft, textured sheen that you can feel under your hand. It disguises fingerprints, water spots and light etching well.

Color Families From Calacatta to Nero and Verde

The range covers most of the classic marble palettes. Names in the titles give a quick sense of each slab:

  • Whites: Calacatta, Bianco and vanilla tones, from bright white with bold veins to softer warm whites. A Calacatta marble slab is a common pick for a statement vanity. Browse white marble slabs for more.
  • Blacks: Nero and other black marbles with white or gold veining; see black marble slabs.
  • Greens: Verde and forest green marbles, popular for powder rooms and bar areas.
  • Beiges and browns: crema, cream, royal and Emperador tones that sit easily with wood cabinetry.
  • Grays, blues and golds: grey, blue and golden slabs, plus patterned names such as Fendi and Patagonia, for bolder installations.

Marble Performance Basics and Alternatives

Marble is mainly calcite and rates about 3 to 4 on the Mohs hardness scale. It can scratch, and acidic liquids such as citrus, wine, vinegar and some cleaners etch the surface. A penetrating sealer slows staining but does not stop etching. Use trivets for hot pans and cutting boards for prep work. If those limits do not fit your project, consider dolomite slabs, which are generally harder than typical marble, travertine slabs for a warmer, more textured look, or onyx slabs for translucent, backlit feature walls.

Planning a Slab Layout

  1. Measure the area and sketch the pieces, including backsplashes, side splashes and edge strips.
  2. Decide where seams can fall and which way the veining should run.
  3. For mirrored veining across two panels, choose consecutive slabs suited to bookmatching.
  4. Have the fabricator template the space after cabinets or framing are installed.
  5. Store and move slabs upright on edge, fully supported. Thinner stone is more prone to cracking if carried flat.

2cm Marble Slabs Sorted into Color Groups and a Honed Finish

These thinner slabs are grouped mostly by color, with one group defined by surface instead. Narrow to a color family that suits your cabinetry, then check the honed group if you prefer a matte top.

  • white marble slabs: Light stone with soft grey or warmer veining, the usual choice for bright kitchens and vanities.
  • grey marble slabs: Cool, mid-tone slabs that pair well with stainless steel and painted cabinets.
  • beige marble slabs: Cream and tan stone for traditional baths and earthy kitchens.
  • black marble slabs: Dark, dramatic slabs for statement islands and powder-room vanities.
  • blue marble slabs: A smaller set of uncommon blue-toned stones for feature walls or one-off vanity tops.
  • red marble slabs: Deep red and burgundy marble, best used sparingly as an accent surface.
  • pink marble slabs: A handful of blush slabs for playful bathrooms and boutique-style vanities.
  • honed marble slabs: More than 30 slabs with a matte finish that softens shine and makes fine scratches less noticeable.

2cm Marble Slabs FAQ

How thick is a 2cm marble slab in inches?

A 2 cm slab is about 3/4 inch thick. A 3 cm slab is about 1 1/4 inch thick.

Can 2cm marble be used for a kitchen countertop?

Yes, but it is usually installed over a plywood substrate for support, with a laminated or mitered edge to build up a thicker look. Many US kitchens use 3 cm stone so it can sit directly on the cabinets.

Is 2 cm or 3 cm marble better for a bathroom vanity?

Both work. 2 cm stone is lighter and common for vanities, especially with a slim modern edge, while 3 cm gives a heavier profile without lamination. Your fabricator can advise on support for your cabinet.

How much does a 2cm marble slab weigh?

Marble at 2 cm thickness weighs roughly 11 to 12 pounds per square foot. A full slab can weigh several hundred pounds, so it needs proper handling equipment.

Which marble finish hides etching best?

Honed and leathered finishes hide etching better than polished. On polished marble, etch marks show as dull spots in the shine.

Does 2cm marble need to be sealed?

Yes. Marble is porous, so a penetrating sealer helps slow stains from oil, coffee and cosmetics. Reseal when water stops beading on the surface.

Your cart

Your cart is empty.

It's in your cart

Pairs well with it

Choose options