Designer Plants USA is an artificial-plant range centered on modular living-wall-style panels, hanging foliage, hedges, topiary, trees and trellises. It suits homeowners, designers and contractors who want consistent greenery without irrigation, soil or routine pruning.
The current catalog contains more than 150 listed products. Artificial hanging plants and bushes form the largest group, followed by living walls; install parts, hedges, topiary balls, trees and trellises broaden the range. The 40x40 format is the most common recorded panel size, with 40x20, 30x30 and 35x35 options also present. List prices start around $7, while the middle half runs from about $24 to $170 per listed item. Very large or specialized configurations extend far above that range. Roughly 95% of listings are in stock.
Plan a Designer Plants USA Green Wall
Measure the installation area in both directions and note interruptions such as outlets, vents, doors and trim. For a rectangular wall, multiply width by height to find the surface area, then compare that area with the actual coverage stated for each panel. Dimensions alone are not enough: overlap, trimming and the attachment method can change the usable coverage.
A 40x40 panel covers a larger area per unit than a narrow 40x20 panel, while smaller formats may be easier to position around corners and openings. Sketch the panel layout before purchasing. Keep cut edges toward boundaries where trim or adjacent foliage can disguise them, and avoid blocking ventilation, sprinklers, lighting or required access panels.
Confirm the substrate before choosing hardware. Wood framing, masonry, drywall and freestanding mesh require different fasteners. The wall or support must carry the combined weight of panels, frames and attachment parts. For a large commercial installation or an overhead application, have the support and fastening plan reviewed by a qualified professional.
Panels, Hedges, Hanging Plants and Trees
- Green-wall panels: Best for broad vertical coverage and repeatable modular layouts. Look closely at foliage density, panel backing and edge connections.
- Artificial hedges: Create a solid linear screen or boundary. Check base support, wind exposure and overall depth as well as height.
- Hanging plants and bushes: Add trailing shapes to shelves, planters or wall compositions. Confirm the attachment point and full hanging length.
- Topiary and artificial trees: Work as freestanding focal points. Verify base dimensions and allow clearance for the widest foliage.
- Trellises: Combine a structured support with planted-looking coverage. Expansion direction and mounting clearance can affect the final dimensions.
Dense boxwood-style panels create a more uniform field, while fern, flowering, tropical and draping foliage introduces stronger variation. Mixing too many leaf shapes in a small area can make panel seams harder to control visually. For a natural-looking composition, establish one dominant foliage type and use contrasting pieces selectively.
Indoor, Outdoor and Commercial Placement
Do not assume every artificial plant is suitable outdoors simply because it contains no living material. Exterior products need an explicit outdoor or weather-resistance statement from the manufacturer. Sun exposure can fade plastics over time, and wind loads can pull at panels, foliage and fasteners.
Product titles in this range include resistant and commercial-grade language, and some mention NFPA certification. Those claims apply only to the specific listing that states them; they should not be generalized to the entire collection. On a code-regulated project, verify the exact documentation, product identity and acceptance requirements with the relevant authority before installation.
Indoors, consider proximity to heat sources and the way artificial leaves interact with lighting. Keep foliage clear of open flames and equipment that produces significant heat. Directional light cast across a panel can emphasize seams, while softer frontal light tends to produce a more continuous appearance.
Cleaning and Long-Term Appearance
Dust artificial foliage with a soft microfiber cloth, feather duster or low-suction vacuum attachment. Support leaves and stems while cleaning so connectors are not strained. For heavier soil, follow the product instructions; test any damp cleaning method in a hidden spot first and avoid harsh solvents.
Inspect exterior installations after strong wind and periodically check fasteners, panel connections and supporting frames. Remove debris trapped behind the foliage so drainage and airflow remain open. If a stem becomes displaced, reposition it gently rather than repeatedly bending the same point.
Designer Plants USA FAQ
What does Designer Plants USA sell?
The range includes artificial hanging plants, bushes, living-wall panels, hedges, topiary forms, trees, trellises and installation parts. Green-wall products and hanging foliage account for most current listings.
Are these living walls made from live plants?
The products in this collection are artificial greenery, despite “living wall” being used as a style or product-type description. They do not need watering, soil or sunlight for growth.
What size artificial green-wall panel is most common?
The most frequent recorded size is 40x40. Other formats include 40x20, 30x30 and 35x35, but shoppers should verify the units, total dimensions and actual coverage on each listing.
Can artificial green-wall panels be used outside?
Only use a product outdoors when its listing explicitly identifies it as suitable for that exposure. Check resistance claims, mounting requirements, expected sun exposure and wind conditions before installation.
Does the collection include artificial devil’s ivy?
Artificial hanging and draping foliage is a major part of the range, and individual plant styles may include ivy-like forms. Search the current titles and confirm the pictured leaf shape, stem length and color on the specific listing.
Are all Designer Plants USA products fire certified?
No collection-wide certification should be assumed. Some current titles mention NFPA certification, but compliance must be confirmed for the exact product and the requirements of the intended project.
How many panels are needed for a wall?
Divide the wall’s usable area by the coverage of one panel, then account for the planned orientation, openings and any trimming. Base the calculation on stated coverage rather than the nominal panel name alone.