Skip to content
Black Friday

Deals through Nov 29

Shop +1 470-845-2793

Glass Mosaics

Sort by

View

Glass Mosaics: products

Load more

119 remaining

Glass mosaic tile consists of small glass pieces arranged individually or on sheets to create a repeatable surface. It is well suited to pools, shower walls, backsplashes and curved or detailed areas where compact modules and luminous color are useful.

This collection includes about 240 products, all specified as glass. Blue leads the color range with about 100 options, followed by roughly 40 gray, 30 green and 20 white choices. Glossy finishes dominate, while satin and semi-gloss finishes provide lower-reflection alternatives. Square and rectangular pieces make up most shapes, with specialty and round formats adding pattern variety.

Listed prices run from about $8 to $71 per item, and the middle half is approximately $21 to $38. A listed item may be a sheet, piece, box or square foot depending on the product, so verify coverage and unit information before comparing costs. Roughly 100% of the range is currently shown in stock.

Where Glass Mosaic Tile Works Best

Every specified product lists a wall application, and about 200 are identified for pools. Only about a dozen list floor use. This distinction is important: a glass mosaic floor tile must be expressly rated for foot traffic and the intended wet or dry setting. A wall rating does not establish floor suitability.

For a glass mosaic tile bathroom installation, use the product on an approved substrate with the waterproofing required for the location. Glass mosaic wall tiles can follow gentle curves and fit around niches more readily than large rigid tile, although careful sheet alignment is necessary to prevent visible seams.

Kitchen glass mosaic tiles bring color and reflect light across a backsplash. Smooth glossy faces are generally easy to wipe, but the numerous grout joints require regular cleaning. Near a range, choose setting materials and grout appropriate for heat and grease exposure and observe the appliance manufacturer’s clearances.

A glass mosaic pool tile must be rated for continuous submersion, pool chemicals and the installation environment. Around 100 products with reported data are marked frost resistant, but frost resistance and pool suitability are separate requirements. Confirm both when the pool is exposed to freezing conditions.

Color and Shape Change the Finished Surface

Blue glass mosaic tile forms the largest color group, spanning aqua, turquoise, navy and mixed aquatic tones. Green glass mosaic tile can read cool or earthy depending on surrounding materials, while white and gray provide quieter backgrounds. Darker glass often creates stronger contrast with grout, making sheet alignment and joint consistency more visible.

Square glass creates an orderly grid. Rectangular and linear glass mosaic tile emphasizes direction, especially in stacked arrangements. Hexagon glass mosaic tile introduces a geometric field, while rounds and specialty shapes soften straight architectural lines. Flower and arabesque-inspired designs act as decorative accents and usually require more attention at cuts and transitions.

Sheet dimensions near 12x12 are common, while frequently listed chip sizes include 1x1, 1x2, 2x2, 2x3 and 3x3. Confirm whether a dimension refers to an individual chip or the overall mesh-mounted sheet. A layout drawing should also account for the manufacturer’s intended grout-joint spacing.

Glass Compared With Stone, Porcelain and Ceramic Mosaic

  • Glass: Reflective, nonporous at the tile face and available in saturated colors. Translucent pieces can reveal adhesive color or installation inconsistencies.
  • Natural stone: Mineral variation and a less uniform surface, but often more porous and sensitive to certain cleaners. Compare natural stone mosaic, marble mosaics and travertine mosaics.
  • Porcelain: Generally durable and available in many floor-rated formats. Review porcelain mosaics when wear resistance is central.
  • Ceramic: Often used on interior walls and backsplashes, with glazed colors and varied shapes. See ceramic mosaics for material-specific options.

The wider mosaics collection makes it easier to compare these materials. Additional stone choices include limestone mosaics, dolomite mosaics and basalt mosaics.

Setting Glass Without Visible Sheet Lines

Start with a flat, clean substrate because glossy glass and regular grids can emphasize unevenness. Use an adhesive recommended by both the tile and setting-material manufacturers. White mortar is commonly specified behind translucent glass because gray or unevenly combed mortar may alter the apparent color.

Dry-fit several sheets to inspect spacing. If the gap between sheets differs from the gaps between chips, the finished installation will reveal a grid. Adjust or cut mesh as necessary while maintaining the pattern. Flatten mortar ridges where the manufacturer directs so they do not show through transparent or translucent pieces, and remove adhesive from joints before it hardens.

Cutting methods depend on glass type and shape. A glass-rated wet saw blade can reduce chipping on many products, while specialized nippers may suit small irregular pieces. Wear eye protection, smooth exposed sharp edges where appropriate and follow the product instructions. Movement and perimeter joints should remain flexible rather than being packed with hard grout.

Cleaning Glossy Glass and Grout

Wipe glass with a soft, nonabrasive cloth and a compatible neutral cleaner. Avoid abrasive pads that can scratch the surface and harsh products that may damage grout, metallic backings or decorative coatings. In showers, removing standing water and soap residue reduces mineral deposits.

Grout selection affects both appearance and maintenance. A matching grout makes individual chips blend into a larger color field, while contrasting grout emphasizes geometry. Confirm compatibility before using abrasive grout or dark pigments with glass, and test a small area to check for scratching or staining.

Glass Mosaic Tile FAQ

Can glass mosaic tile be used in a shower?

Glass mosaic tile shower installations are common on properly prepared walls, niches and some floors. The exact product must be approved for the surface, and the shower still requires a complete waterproofing and drainage system.

Is glass mosaic suitable for a pool?

Only products rated for submerged pool use should be selected. Confirm chemical resistance, frost suitability where relevant and compatibility among the tile, mortar, grout and pool shell.

Can glass mosaics be installed on a floor?

Only a small portion of this collection lists floor use. Choose a floor-rated product and verify slip, traffic and wet-area suitability rather than assuming that every small mosaic is safe underfoot.

Why does the adhesive matter behind glass?

Some glass is translucent, so the adhesive color and trowel pattern can affect its appearance. Use the specified mortar and application method to produce consistent color and adequate coverage.

How do I prevent visible lines between mosaic sheets?

Dry-fit sheets, compare inter-sheet gaps with chip spacing and adjust the mesh before setting. Step back during installation to inspect the pattern while the mortar still allows correction.

Is glossy glass difficult to clean?

The glass face is generally easy to wipe, but water spots and residue are more visible on reflective surfaces. Regular drying and a nonabrasive neutral cleaner help maintain clarity.

Your cart (1 item)

Yescom 30x 1/4" Angled Beveled Washers 30 Degree 316 Stainless Steel - Black
$39.99
Yescom 30x 1/4" Angled Beveled Washers 30 Degree 316 Stainless Steel

Black

YES2488

$39.99 / Piece
Piece
Total weight 10.0 lb
Subtotal $39.99

Taxes and shipping calculated at checkout

View cart

It's in your cart

Pairs well with it

Choose options