Skip to content
Black Friday

Deals through Nov 29

Shop +1 470-845-2793

Hardware

Sort by

View

Hardware: products

Antique Brass Round "Bari" Cabinet Knob

10%OFF
$8.09 / Piece $8.99 / Piece

Lew's Hardware Polished Brass Barrel Series

10%OFF
$6.21 / Piece $6.90 / Piece

Worn Brass Round "Bari" Cabinet Knob

10%OFF
$8.09 / Piece $8.99 / Piece

Worn Brass "Capri" Cabinet Drawer Ring Pulls

10%OFF
$9.89 / Piece $10.99 / Piece

Round "Capri" Worn Brass Cabinet Knob

10%OFF
$8.09 / Piece $8.99 / Piece

Round Brushed Bronze "Plato" Flat Cabinet Knob

10%OFF
$12.59 / Piece $13.99 / Piece

Recessed Matte Black Drawer Pulls

10%OFF
$15.29 / Piece $16.99 / Piece

Drawer Cup Pulls "Amalfi" in Worn Brass

10%OFF
$9.89 / Piece $10.99 / Piece

Lew's Hardware Brushed Nickel Barrel Series

10%OFF
$6.21 / Piece $6.90 / Piece

Lew's Hardware Polished Chrome Barrel Series

10%OFF
$6.21 / Piece $6.90 / Piece

Matte White "Edge Straight" Tab Drawer Pulls

20%OFF
$6.39 / Piece $7.99 / Piece

Antique Brass "Tuscany" Round Cabinet Knob

10%OFF
$8.99 / Piece $9.99 / Piece
Load more

133 remaining

Hardware is the functional finishing layer that lets cabinets open, secures components and supports installation work. This collection is best suited to cabinet updates and tile projects, with knobs, handles, drawer pulls, sanded grout and unsanded grout forming most of the assortment.

There are more than 180 listed products. Cabinet knobs and handles form the largest named group, followed by drawer pulls, individual knobs, pulls and grout products. Brass appears frequently in product titles, alongside antique, brushed, black, bronze and nickel descriptions. Because the catalog combines decorative fittings with tile-setting materials, start by filtering for the project type rather than comparing every item as if it performed the same job.

List prices begin around $6, and the middle half of the assortment runs from roughly $9 to $25 per listed item. A few higher-priced products extend the overall range to about $680. The price may cover a single knob, pull, packaged unit or grout product, so confirm quantity, dimensions and coverage information on the individual listing. Roughly 97% of the current range is marked in stock.

Match Hardware to the Job Before Choosing a Finish

For doors and drawers, first identify the fitting type and existing drilling. A knob normally uses one mounting point; a pull generally requires two. When replacing a two-hole pull, measure center-to-center—the distance from the center of one screw hole to the center of the other. Overall length is a different measurement and does not determine whether the existing holes will align.

Hardware handles for cabinets should leave enough finger clearance for comfortable use without projecting so far that they catch clothing in a narrow aisle. Longer kitchen hardware pulls can make wide drawers easier to operate, but the mounting pattern must suit the drawer front. Cabinet hardware with backplate designs can cover minor surface marks or unused impressions, provided the backplate dimensions are checked before purchase.

This broad category links to dedicated cabinet hardware, sink hardware and table hardware collections. Those pages should be used when the application is already known. For a larger renovation, related kitchen remodel fixtures and bathroom remodel and fixtures can help keep fittings coordinated with the room’s other functional elements.

Brass, Bronze, Black and Nickel in Real Rooms

Finish names describe appearance, but similar names from different product lines may not match exactly. Brushed brass hardware tends to show linear texture and softer reflections than polished metal. Antique brass cabinet hardware usually has darker tonal variation, while black finishes create stronger contrast against light painted cabinetry. Brushed nickel kitchen hardware often bridges warm wood and cool stainless-colored appliances because its restrained sheen is less reflective than polished chrome.

  • Brass: Warm in color and prominent against white, navy, green and dark wood fronts.
  • Bronze: Generally deeper and lower contrast on brown wood; the exact undertone varies by product.
  • Matte black: Graphic and easy to repeat, although dust, oils and hard-water residue may be more visible in some settings.
  • Brushed nickel: A quieter metallic finish that often coordinates with cool-toned fixtures and appliances.

Do not rely on a finish name alone. Compare the product photos and stated finish, then keep highly visible fittings from one coordinated range when close matching matters. A mixed-metal plan can still look intentional if each metal repeats in at least one other element and the room is not crowded with unrelated finishes.

Sanded vs Unsanded Grout

Sanded grout contains aggregate that helps it perform in many wider grout joints and reduces shrinkage. Unsanded grout has a smoother texture and is commonly considered for narrow joints or surfaces that could be scratched by abrasive aggregate. The correct choice depends on the tile material, joint width, location and the grout manufacturer’s instructions.

Some polished stone, glass or delicate tile surfaces can be vulnerable to scratching, so test compatibility and follow the tile and grout manufacturers’ guidance. Do not infer coverage from package price: coverage changes with tile size, tile thickness and joint width. Movement joints should use the specified flexible sealant rather than being packed with ordinary grout.

Installation Checks That Prevent Costly Rework

  1. Count every door and drawer, then note which positions need knobs, pulls or pairs.
  2. Record door thickness, screw length, hole count and center-to-center spacing.
  3. Make a drilling template or jig and test it on scrap material before drilling a finished front.
  4. Check that pull projections will clear adjacent doors, appliances and corner drawers.
  5. Hand-start screws to avoid cross-threading, then tighten evenly without crushing the cabinet face.

For a full room update, account for hinge swing and door clearance before selecting prominent pulls. This is especially important near a wall, inside corner or appliance handle. Interior door hardware and exterior door hardware have different structural and security requirements from decorative cabinet fittings; choose products specifically rated and configured for those door applications rather than adapting a cabinet pull.

Cleaning and Maintaining Decorative Fittings

Use a soft damp cloth and dry the surface promptly. Abrasive pads, harsh chemicals and acidic cleaners can alter plated, lacquered or patinated finishes. Do not assume an aged or antique appearance is solid metal throughout; follow the care information provided for the particular item.

Periodically check fittings that receive frequent use. If a pull loosens, support it while tightening the mounting screws rather than twisting the handle against the cabinet face. For broader room planning, coordinate functional fittings with nearby lighting and doors, but allow practical requirements such as wet-location suitability and load to take priority over appearance.

Hardware FAQ

How do I measure a replacement cabinet pull?

Measure from the center of one mounting hole to the center of the other. Also record the overall length, projection and available space, since two pulls with the same hole spacing may have different proportions.

Is matte black cabinet hardware difficult to maintain?

It is generally straightforward to clean with a soft damp cloth, followed by drying. Oils, dust or mineral residue may be visible on a dark surface, so avoid abrasive cleaners and wipe frequently touched pieces as needed.

Can I mix brass kitchen hardware with other metals?

Yes. A controlled mix works best when each finish repeats elsewhere and when undertones are considered, such as warm brass beside warm lighting or wood. Exact matching is unnecessary, but too many one-off finishes can look accidental.

Should I use sanded or unsanded grout?

Base the decision on joint width, tile sensitivity, location and manufacturer instructions. Sanded products are widely used for broader joints, while unsanded products are often chosen for narrow joints or scratch-sensitive surfaces.

Can cabinet pulls be used as door hardware?

Cabinet pulls are not substitutes for latches, locksets or load-rated door fittings. Select purpose-made door products when the fitting must latch, lock, support weight or withstand exterior exposure.

What screw length do cabinet handles need?

The screw must pass through the door or drawer front and engage the fitting securely without bottoming out. Measure the panel thickness and account for any backplate, washer or built-up drawer box before choosing the fastener.

Your cart

Your cart is empty.

It's in your cart

Pairs well with it

Choose options