Hardwood flooring is a real-wood surface offered in solid boards or engineered planks built from multiple layers. It suits residential interiors where natural grain, repairability and long service life matter, provided moisture and installation conditions are appropriate.
This collection contains about 60 products, led by wood products and smaller solid and engineered groups. Listed prices mostly run from around $6 to $8 per item, with a midpoint near $7; the listed item may be a square foot, carton or another sales unit, so verify coverage and unit details on the product page. Roughly 80% of the range is currently in stock.
Choosing Hardwood Flooring by Construction
Solid hardwood flooring consists of wood through its full thickness. It can often be sanded and refinished more times than engineered material, but it expands and contracts more directly with changes in moisture. Engineered hardwood flooring uses a real-wood wear layer over a dimensionally stable core. Its layered construction can make it suitable for a wider range of subfloors and installation locations, subject to the manufacturer’s instructions.
Construction alone does not determine durability. For engineered planks, compare wear-layer thickness, total thickness, core construction and approved refinishing methods. For solid boards, confirm grade, milling profile and moisture requirements. The best engineered hardwood flooring for a project is the product whose construction, installation method and finish match the actual room—not simply the thickest plank.
Teak, Mahogany and Related Woods
Teak is the most frequently specified species in the available catalog data, followed by mahogany. Teak hardwood flooring is known for warm coloration and natural oils, while mahogany hardwood flooring is valued for rich red-to-brown tones. Wood color changes with light exposure and age, and natural boards vary in grain and shade, so installation should blend material from multiple cartons when the instructions permit.
The range also includes titles referencing garapa, cumaru and Santos mahogany. Species names can refer to distinct woods with different hardness and movement characteristics, so use the product’s technical documentation rather than color alone. Eleven specified products are made in Peru, including teak and mahogany options.
Width, Thickness and Surface Details
Among products with recorded specifications, 5-inch and 3.25-inch planks are the most common, with a smaller number of 4-inch options. Eleven products specify a 3/4-inch thickness. Wider boards show more grain and create fewer seams, but they require careful acclimation and subfloor preparation. Narrower boards create a more rhythmic pattern and can distribute natural variation across the floor.
Smooth, semi-glossy surfaces with UV ceramic finishes appear in the specified solid-wood group. A smoother or glossier surface can make scratches and dust more visible than a textured, low-sheen finish. Rustic hardwood flooring may use stronger grain variation, knots or distressed texture, but “rustic” is not a universal grade; examine the stated grade and allowable character for each product.
Straight Planks vs Herringbone
Straight installation uses material efficiently and keeps room lines simple. Engineered hardwood flooring herringbone creates a directional pattern with more cuts and layout work. Herringbone pieces must have the correct left/right milling or compatible tongue-and-groove arrangement, and the installer should establish accurate reference lines before adhesive is applied.
Subfloor, Moisture and Installation
Eleven catalog products specify stapled or nailed installation. That method generally requires a suitable wood subfloor and the fastener schedule stated by the manufacturer. Installing engineered hardwood flooring may instead involve glue, staples, nails or a floating system, depending entirely on the product. Do not assume one method is interchangeable with another.
- Test site and subfloor moisture using the methods required by the flooring manufacturer.
- Confirm the subfloor is clean, flat, structurally sound and appropriate for the fastening or adhesive system.
- Store and acclimate boards only as directed; species, construction and site conditions affect the procedure.
- Plan board direction and starter rows, then blend cartons to distribute natural color variation.
- Maintain the specified perimeter expansion space and use approved transition details at adjoining surfaces.
Ten specified products are not frost resistant, reinforcing that these choices are intended for protected interiors rather than outdoor freeze-thaw exposure. For wet or high-moisture locations, review waterproof hardwood flooring and verify what “waterproof” covers in the product documentation. It does not remove the need to address leaks or subfloor moisture.
Hardwood Flooring Cost and Coverage
Hardwood flooring prices must be compared by coverage, not only by the displayed item price. Multiply the measured floor area by an appropriate cutting allowance based on room shape and layout, then divide by the carton coverage and round up to whole cartons. Complex patterns, angled walls and numerous closets typically create more offcuts than a simple rectangular room.
Include underlayment or adhesive, moisture-control products, trims, transitions, delivery and professional labor when evaluating hardwood flooring cost. Cheap hardwood flooring can become expensive if it has unsuitable milling, limited usable material or installation requirements that were overlooked. Keep unopened extra boards when practical for future repairs, following storage guidance.
Cleaning and Long-Term Care for Hardwood Flooring
Remove grit with a soft broom or a vacuum approved for wood floors. Wipe spills promptly and use only cleaners allowed by the finish manufacturer; steam and excessive water can damage wood or joints. Place protective pads under furniture, lift rather than drag heavy objects and maintain stable indoor humidity within the flooring maker’s recommended range.
If real wood is not appropriate for the site, compare laminate flooring, vinyl flooring or ceramic and porcelain tile. The parent flooring collection brings these surface categories together.
Hardwood Flooring FAQ
Is engineered wood the same as laminate?
No. Engineered wood has a real-wood surface layer, while laminate typically uses a printed image layer over a composite core. Their refinishing options, moisture behavior and installation requirements differ.
Can hardwood be installed over concrete?
Some engineered products are approved for concrete with a specified adhesive, moisture system or floating method. Solid products and nail-down systems may require a compatible subfloor assembly. Follow the exact product instructions and moisture limits.
How do I compare teak and Santos mahogany hardwood flooring?
Compare verified species, hardness, grade, finish, board construction and color variation. Names and photos alone are insufficient because appearance and performance can vary by product.
How much flooring should I purchase?
Measure each area, calculate total square footage and account for cuts according to the layout and installer’s plan. Buy whole cartons based on the stated carton coverage, and confirm that all material is from a compatible production lot when required.
Can I install hardwood in a basement?
Only products approved for below-grade installation should be considered. Engineered construction is often the relevant option, but moisture testing and the specified vapor-control system remain essential.