Skip to content
Black Friday

Deals through Nov 29

Shop +1 470-845-2793

Outdoor Lighting

Sort by

View

Outdoor Lighting: products

Load more

255 remaining

Outdoor lighting provides functional illumination for walking routes, entrances, stairs and activity areas after dark. It suits homeowners and landscape professionals planning layered light rather than relying on one bright fixture to cover an entire property.

This collection contains more than 300 products, led by path lights, solar pathway fixtures, solar street lights, step lights, deck lights and wall-mounted designs. Black is the most frequently documented color, and specified materials include metal, glass-and-metal combinations, copper and stainless steel. Typical list prices run from about $60 to $200 per item, while the complete range begins around $10 and reaches about $1,250. Prices apply to the listed item, which might be one fixture or a multipack as described on its product page. Roughly 60% of the products are currently listed as in stock.

Build Outdoor Lighting in Practical Layers

Start with circulation. Steps, changes in grade, gates and turns need enough illumination for people to read the route without harsh glare. Dedicated path lights distribute low-level light along walks and planting beds, while step and deck fixtures mark edges at a lower mounting height.

Next, address entrances and vertical surfaces with outdoor wall lighting. Place fixtures so they reveal locks, handles and approach areas without shining directly into a visitor’s eyes. Use flood and spot lights selectively for broader work areas or focused landscape accents. For seating zones and pergolas, outdoor string lights can provide a separate ambient layer when their listing confirms suitability for the installation location.

The broader lighting collection helps coordinate indoor and exterior fixtures, while the outdoor range covers adjacent furnishings and garden products. Indoor-only categories such as pendant lighting and wall lamps should not be installed outside unless the individual fixture is specifically rated for that environment.

Lumens, Beam Direction and Color Temperature

When comparing lumens for outdoor lighting, remember that lumens measure total light output, not how well a fixture controls glare or places light on a surface. A lower-output shielded step light may guide movement more effectively than a brighter exposed source. Beam spread, mounting height, spacing and nearby reflective surfaces all affect the result.

Use consistent or deliberately zoned color temperature across connected sightlines. Warm light is often comfortable near seating and façades, while task areas may benefit from slightly clearer illumination. Avoid combining many noticeably different color temperatures in one view unless the contrast has a purpose.

Dark-sky-conscious planning directs light downward and limits unnecessary spill above the fixture or across property lines. Select the lowest useful output, shield the source and aim adjustable fixtures carefully. This can improve visual comfort while preserving the intended nighttime effect.

Solar vs Low-Voltage Landscape Systems

  • Solar fixtures: Install without a wired power run and can suit sunny, flexible locations. Runtime and output depend on solar exposure, battery condition, season and weather, so shaded areas may produce inconsistent results.
  • Low-voltage fixtures: Use a transformer and cable system, allowing coordinated controls and more predictable output. Installation requires correct transformer sizing, cable planning and weather-resistant connections.
  • Line-voltage fixtures: May serve walls and larger areas but require products, boxes and installation methods approved for exterior use. Electrical work should comply with applicable codes and may require a qualified electrician.

The best outdoor landscape lighting system is the one matched to the site’s sun exposure, required brightness, control needs and installation constraints. Solar is not automatically better for every remote location, and wired lighting is not necessary for every decorative accent.

Weather Ratings and Material Selection

A fixture described as suitable for damp locations is not automatically appropriate for direct rain. Wet-location fixtures are intended for exposure defined by their rating and installation instructions. Check the complete product rating, not just marketing terms such as “waterproof,” and use compatible weatherproof boxes, connectors and covers.

Metal finishes weather differently. Stainless steel, copper, brass and coated aluminum can all be suitable when designed for exterior service, but salt air, irrigation and pollutants may accelerate surface changes or corrosion. Brass outdoor lighting and copper fixtures may develop a patina; coated black fixtures should be cleaned without abrasives that damage the protective finish.

For outdoor kitchen lighting, illuminate work surfaces from positions that do not cast the cook’s shadow onto the counter or grill area. Fixtures near heat, grease or water need ratings and clearances appropriate to those conditions. Decorative indoor fixtures are not substitutes for exterior-rated products.

Spacing Paths, Steps and Walls

Lay out outdoor landscape lighting after dark with temporary markers where possible. Alternating path fixtures can avoid a rigid runway effect, but spacing must still reveal changes in elevation. Keep sources out of direct eye lines and away from locations where plants will quickly block them.

Step lights should reveal the tread and edge rather than create a bright point at eye level. Deck lights can identify perimeter transitions and rail posts, while outdoor puck lights may work beneath rails or on hardscape only when the product is expressly rated for exterior exposure. For wall fixtures, confirm mounting height, fixture projection, door swing and clearance from combustible materials as directed by the manufacturer.

Outdoor Lighting FAQ

How many lumens does outdoor lighting need?

There is no single number for every application. A step marker needs much less output than a driveway work area, and shielding, beam angle, mounting height and surface reflectance affect useful brightness.

Are solar path lights reliable all night?

They can be, but performance depends on direct sun, battery capacity, temperature, weather and fixture settings. Evaluate the solar panel location separately from the desired light position when the design allows it.

What is the difference between modern outdoor lighting and contemporary outdoor lighting?

Modern usually refers to a defined design movement emphasizing simple forms and limited ornament, while contemporary describes styles current now. Product naming often overlaps, so compare form, finish, scale and light distribution rather than the label alone.

Can outdoor puck lights be installed on deck stairs?

Only if the fixture is rated for the exposure and installation method. It should also be positioned to light the tread without creating glare and installed with wiring or solar components protected from damage.

Do motion sensors work with exterior lights?

Yes, when the sensor and fixture are compatible and rated for outdoor use. Aim and sensitivity settings should detect movement in the intended zone without frequent activation from traffic, plants or animals outside it.

How should exterior fixtures be maintained?

Turn off power before cleaning, remove debris from lenses and solar panels, and inspect seals, fasteners and cable connections periodically. Follow the fixture instructions and replace damaged weatherproof components rather than sealing over an electrical fault.

Your cart (1 item)

Ralinksi - Panel Bed - Gray / Twin
$179.98
Ralinksi - Panel Bed

Gray / Twin

B2587B11

$179.98 / Piece
Piece
Total weight 80.0 lb
Subtotal $179.98

Taxes and shipping calculated at checkout

View cart

It's in your cart

Pairs well with it

Choose options