Skip to content
Black Friday

Deals through Nov 29

Shop +1 470-845-2793

Semi Flush Mount Lights

Sort by

View

Semi Flush Mount Lights: products

Load more

48 remaining

A semi-flush light is the close cousin of the flush mount ceiling light: it attaches directly to the ceiling box but holds its shade on a short stem or set of arms, usually a few inches to about a foot below the canopy. That gap lets light spill upward onto the ceiling as well as down, so a room feels brighter and less boxed-in than with a fixture pressed tight to the surface. It suits standard 8 to 9 foot ceilings where a chandelier or pendant would hang too low.

This collection holds close to 100 fixtures, and more than 90% are listed in stock. List prices begin around $20 and climb to about $1,365 per fixture, but most fall between about $95 and $365, with a typical fixture near $140. Glass and metal, alone or combined, account for most of the specified materials, with a handful of wood designs and one marble piece. Gold is the most common finish by a wide margin, followed by white, black, green, beige, brown and blue, and round shapes far outnumber square and oval ones.

Semi-Flush vs Flush: Matching the Ceiling Height

  • Ceilings under 8 feet: a true flush fixture keeps headroom. A short-drop semi-flush can still work where nobody walks directly underneath, such as over a bed.
  • 8 to 9 foot ceilings: the sweet spot for semi-flush. As a rule, keep about 7 feet between the floor and the bottom of the fixture wherever people walk.
  • Ceilings above 9 feet: a small semi-flush can look lost; choose a larger diameter or a multi-head design, or consider a pendant.

For tight-to-ceiling designs, see the main flush mount lighting collection, which includes the full range of close-to-ceiling fixtures.

Sizing a Semi Flush Mount Light Fixture to the Room

A common rule of thumb is to add the room's length and width in feet and treat that number, in inches, as the upper limit for the fixture diameter. A 10 by 12 foot bedroom, for example, points to a fixture of up to about 22 inches. Then adjust by room:

  1. Hallways: small fixtures of about 10 to 14 inches, spaced roughly every 8 to 10 feet along a long hall.
  2. Bedrooms: about 14 to 22 inches, centered over the open floor or the foot of the bed rather than directly above the pillows.
  3. Kitchens: semi flush kitchen light fixtures work over an eat-in area or island where a pendant would block sight lines; add under-cabinet lights for prep counters.
  4. Bathrooms: pick a fixture rated for damp locations, ideally with an enclosed glass shade.
  5. Living rooms: larger or multi-head designs, often 20 inches or more, spread light across a seating area.

Check light output too. A living room needs more lumens than a hallway, and two medium fixtures often light a long room more evenly than one large one.

Opal, Clear and Stained Glass Shades

Opal and frosted glass diffuse light evenly and hide the bulb, a good fit for bedrooms. Clear and seeded glass show the bulb, so pair them with decorative filament LEDs. Stained Tiffany-style glass appears in several listings and adds color and pattern to traditional rooms and dining spaces. Metal shades and cages suit industrial kitchens and laundry rooms, while wood accents warm up Scandinavian and farmhouse rooms.

Gold and brass finishes lead the range and sit well with warm white bulbs and wood; black reads modern or industrial; chrome, satin nickel and silver suit bathrooms with matching faucets. Matching a brass fixture to cabinet hardware or a mirror frame gives a room a connected look.

Modern, Vintage and Industrial Looks

Modern designs, the nearest relatives of a modern flush mount ceiling light, use simple domes, discs, globes and multi-arm sputnik shapes, often in black or gold with opal glass. Vintage styles bring schoolhouse shades, fluted or ribbed glass and antique brass. Industrial fixtures add exposed bulbs, metal cages and dark bronze. Crystal-trimmed pieces sit between semi-flush and small chandelier, giving sparkle to a room too low for a hanging chandelier.

Installation Notes

A semi-flush fixture mounts to a standard ceiling electrical box with a crossbar or mounting plate, just like a flush fixture. Turn off the circuit at the breaker before starting, confirm the box is secured to framing and suits the fixture weight, and follow the wiring diagram. Heavy glass and multi-head designs may need a reinforced or fan-rated box. If the stem is adjustable or comes with extension rods, set the drop before you wire it up. When in doubt, hire a licensed electrician. Check each listing for bulb type, maximum wattage and dimmer compatibility.

Semi Flush Mount Lights FAQ

What is the difference between flush and semi flush ceiling lights?

A flush fixture sits tight against the ceiling with no gap. A semi-flush fixture hangs a few inches to about a foot below on a short stem, which lets light reach the ceiling and gives a more decorative look. Flush suits low ceilings, while semi-flush suits 8-foot ceilings and up.

Is a semi-flush light a good choice for a bedroom?

Yes, it is one of the most common bedroom choices. An opal or fabric-diffused shade keeps the light soft when you are lying down. Center it over the main floor area rather than directly over the bed's headboard.

How low should a semi-flush fixture hang?

Keep about 7 feet of clearance under the fixture wherever people walk. With 8-foot ceilings, that means a drop of roughly a foot or less. Over a bed or a table, it can hang a few inches closer.

Do semi-flush lights work in kitchens?

They work well over an eat-in area or in kitchens with 8 to 9 foot ceilings, where a pendant would hang too low. Glass and metal shades wipe clean of cooking residue easily. Add task lighting under the cabinets for prep areas.

What size semi-flush light do I need?

Add the room's length and width in feet and use the total in inches as a rough maximum diameter. Most bedrooms and kitchens suit fixtures of about 14 to 22 inches, and long rooms often look better with two.

Can a semi-flush light go on a porch?

Only if the listing rates it for damp or wet locations. Check that rating before installing a fixture under an eave or on a covered porch, and choose an enclosed shade to keep insects out.

Your cart

Your cart is empty.

It's in your cart

Pairs well with it

Choose options