Skip to content
Black Friday

Deals through Nov 29

Shop +1 470-845-2793

Shower Doors

Sort by

View

Shower Doors: products

Load more

41 remaining

Shower doors are fixed or operable glass panels that contain water while providing access to a shower enclosure. Sliding models suit rooms with limited clearance, while pivot and frameless designs work well when the opening and surrounding walls can support their installation requirements.

This collection contains about 150 models, with frameless, sliding, pivot, single- and double-door terminology appearing throughout the range. Clear tempered glass is common, alongside matte black, brushed nickel, chrome, gold, silver and gray hardware. Listed-item prices mostly fall from around $360 to $520, with a broader span from about $150 to $910; an item may be one door, panel or complete set, so compare included components rather than price alone. Roughly 97% of the collection is currently in stock.

Choosing Shower Doors for the Opening

Measure the finished opening after tile, wall panels and the shower base are installed. Take width measurements at the top, middle and bottom because walls can be out of plumb, and record the finished height separately. A nominal 60-inch opening does not mean every 60-inch door will fit: each product has an adjustment range that must contain the actual finished width.

Check where the door can move before selecting an operating style. A pivot shower door needs a clear swing path that does not strike a toilet, vanity, towel bar or entry door. Sliding shower doors keep movement within the enclosure footprint and are often practical for narrow bathrooms. A single shower door can simplify a compact opening, while double sliding panels may make entry easier from either side.

Also confirm the curb or base is wide and level enough for the bottom track, guide or seal specified by the manufacturer. Curbless showers require especially careful water-control planning. The showerhead should generally direct spray away from the opening and door gaps.

Frameless, Semi-Frameless and Framed Construction

  • Frameless glass shower doors: These use minimal perimeter metal and rely on heavier glass, hinges, brackets and accurate wall preparation. They create an open appearance but allow less tolerance for uneven conditions.
  • Semi-frameless shower door: This construction reduces visible framing while retaining metal where it helps with alignment or water control. It can balance a lighter look with more adjustment flexibility.
  • Framed doors: A shower door frame surrounds more of the glass and can conceal minor edge variations. Tracks and channels require routine cleaning because residue can collect along their seams.

A frameless shower door is not automatically watertight. Small clearances are necessary for movement, and seals, sweeps, curb slope and spray direction all affect water containment. Review the exact glass thickness and hardware supplied with each model instead of assuming all frameless products use the same construction.

Glass, Hardware and Bathroom Coordination

A tempered glass shower door is designed so that, if broken, it fractures differently from ordinary annealed glass. Never drill, notch or cut tempered glass at the jobsite; all fabrication must occur before tempering. Inspect panels before installation and protect glass edges, since edge impact can cause failure.

Clear glass keeps tile visible and passes light through the enclosure, but it also shows water spots readily. Hardware color should coordinate with nearby fixtures without requiring an exact match. A black shower door creates a defined outline, while chrome and brushed nickel tend to read more quietly against clear glass. Gold-tone hardware can provide a warmer accent.

For a coordinated renovation, compare the door with the controls and spray pattern in shower faucet and system options. The wider bathroom remodel and fixtures collection helps organize the full project, while bathroom sinks and bathroom vanities can inform clearance and finish decisions. For compact enclosure layouts, also review shower corners.

Installing Glass Shower Doors

Installing shower doors begins with verifying that framing or approved backing is available wherever hinges, channels or brackets must fasten. Tile alone is not structural support. Use the manufacturer’s fastener locations, anchors, sealant type and curing instructions, and confirm that drilling will not contact concealed plumbing or wiring.

Frameless assemblies are heavy and sensitive to alignment, so professional installation is often appropriate. Do not force glass into an opening that is outside the stated adjustment range. Once aligned, apply sealant only where directed; sealing an intended drainage path can trap water rather than prevent leaks.

Clean glass with a soft cloth, a nonabrasive cleaner and a squeegee after use. Avoid abrasive pads on glass and plated hardware. Periodically check sweeps, seals, rollers, handles and hinge fasteners for wear or movement, replacing compatible parts when needed.

Shower Doors FAQ

Are sliding glass shower doors frameless?

Some are, but the term varies by construction. Frameless sliding shower doors may still use a top rail, rollers, guides and small brackets even though they lack a full perimeter frame. Review product images and the component list to understand how much metal is visible.

What is the difference between a pivot door and a sliding door?

A pivot door swings through an arc on hinges or pivot hardware, while a sliding door travels parallel to another panel. Pivot doors provide a broad opening but need exterior clearance; sliding designs conserve floor space but have overlapping glass and roller or track components.

Can bathroom shower doors be installed on an out-of-plumb wall?

Only within the adjustment tolerance stated for the model. Framed and semi-frameless channels may accommodate more variation than some frameless systems. Measure the finished opening at several points before choosing a door.

What should I check before installing a frameless shower door?

Confirm the finished width, height, curb level, wall plumb and required structural backing. Verify the door swing, glass orientation and exact hardware locations before drilling. Because tempered glass cannot be modified onsite, an incorrect opening or hole position cannot be corrected by trimming the panel.

How should shower door handles be positioned?

Follow the factory-drilled holes and assembly instructions; do not make new holes in tempered glass. Place towel bars or projecting handles where they will not hit adjacent glass, walls or fixtures during normal operation.

Do glass doors work over a bathtub?

Only products specifically designed as bathtub shower doors should be used on a tub. Confirm the available mounting surface, panel height, tub-rim level and faucet clearance. For the rest of the bathing area, coordinate with bathtubs and the appropriate bathtub faucet.

Your cart (1 item)

Aluminum Frame Double Sliding Shower Door with Tempered Glass - Matt Black - Matt Black
$393.95
Aluminum Frame Double Sliding Shower Door with Tempered Glass - Matt Black

Matt Black

W1675P484267

$393.95 / Piece
Piece
Total weight 112.0 lb
Subtotal $393.95

Taxes and shipping calculated at checkout

View cart

It's in your cart

Pairs well with it

Choose options