Structure of Tree is a brand collection of landscape lighting rather than information about botanical tree anatomy. The range is intended for exterior lighting plans that need path, hardscape, deck, wall, step, spot, or wash fixtures plus selected connection and control components.
There are about 35 products in the collection. Specialty lights form the largest group, followed by path and area lights; connectors, wash lights, controls, spotlights, and pathway lighting complete the assortment. Listed-item prices generally run from about $35 to $220, with the overall range extending from around $6 to $525. A listing may represent one fixture, a multipack, or a component, so compare contents rather than treating prices as directly equivalent. The full collection is currently in stock.
Understanding the Structure of Tree Lighting Range
Frequent names in the assortment include hardscape, path, deck, wall, post, step, paver, surface-mount, and wash lighting. Terms such as mini, micro, cube, conical, elliptical, and covert describe differing forms or beam presentations, but they do not by themselves establish brightness, voltage, weather protection, or installation method.
Begin with the surface and purpose. Path lights typically place light above planting beds or walks and direct it toward the ground. Step and deck lights are mounted lower to identify level changes and edges. Hardscape or paver fixtures integrate with masonry or constructed surfaces, while wash lights spread illumination across a wall, planting area, or architectural feature.
Plan the Effect Before Choosing Fixtures
Exterior lighting works best as a layered system. Use restrained path illumination for navigation, focused fixtures for steps and transitions, and selected washes or accents for depth. Placing the same bright fixture at equal intervals can create glare and a runway effect; vary fixture type and spacing according to the actual landscape.
Brightness is only one specification. Compare lumen output, beam angle, color temperature, color rendering, wattage, voltage, dimming compatibility, and rated operating environment when those details are provided. Warm-white light commonly gives wood, brick, and planting a softer appearance, while cooler light can appear sharper, but the right choice depends on the materials and adjacent lighting.
Path Lights vs Hardscape and Wash Lights
- Path or area lights: Designed to cast light over nearby ground. They require deliberate placement to illuminate the route without shining into people’s eyes.
- Hardscape, paver, and step lights: Integrated into or mounted against built surfaces. Installation details must suit the masonry, decking, wall, or stair construction.
- Wash lights: Spread light across a broader surface. Distance and aiming affect how evenly the beam reads.
- Spotlights: Concentrate light on a smaller subject. Careful aiming limits glare and light spill.
Do not select a fixture solely because its name matches a location. A deck light may still differ in voltage, mounting depth, wiring access, and environmental rating from another deck light. Confirm every technical requirement at the individual-product level.
Voltage, Connections, and Controls
Landscape systems must use compatible electrical components. Match fixtures, transformer or power supply, connectors, cable, controls, and any dimming equipment by voltage and manufacturer instructions. A connector’s physical fit does not prove electrical compatibility.
Calculate the connected load using the specified wattage of every fixture and follow the power equipment’s capacity requirements. Long cable runs can experience voltage drop, so conductor size, run length, layout, and total load should be assessed as a system. Electrical work must comply with applicable codes, and outdoor connections need the protection and installation method required for their location.
Controls can automate schedules or divide the yard into zones. Separate zones are useful when path lights, entertaining areas, and accent lights should operate at different times. Confirm that the chosen control supports the lighting type and total load rather than assuming universal compatibility.
Outdoor Rating and Installation Details
“Landscape light” does not mean every product can be installed in every exterior condition. Check the stated wet- or damp-location suitability, ingress protection information when supplied, permitted mounting orientation, operating temperature, and whether the fixture can contact soil, paving, or irrigation water.
Before digging, identify underground utilities through the appropriate local service. Lay out fixture positions after dark with temporary markers, then test viewing angles from paths, windows, seating areas, and neighboring property. Avoid directing strong beams toward drivers or bedrooms.
For surface, step, and hardscape installations, plan cable routes before the finished material is closed. Provide access to serviceable connections and follow specified clearances. Fixtures integrated into masonry can be difficult to reposition, making careful mockup and measurement especially important.
Cleaning and Ongoing Adjustment
Turn power off before maintenance. Remove leaves, soil, mineral deposits, and debris from lenses with methods approved for the fixture finish. Do not use abrasive pads that can scratch coatings or lenses, and do not pressure-wash fixtures unless their instructions expressly allow it.
Plants grow and landscapes shift. Recheck aiming and clearance seasonally so foliage does not trap heat, block the beam, or push against the fixture. Inspect visible cable, mounts, seals, and connectors for damage, and have electrical faults addressed by a qualified professional.
Structure & Tree FAQ
Is Structure & Tree a botanical collection?
No. Despite the search phrase “structure of tree,” this page contains a landscape-lighting brand range. Its products include path, hardscape, deck, wall, step, wash, and connection items.
What type of light works beside a walkway?
A path or area light is the usual starting point because it directs light toward the walking surface. Select placement and output to reveal changes in grade without creating glare.
Can I mix these fixtures with an existing landscape-lighting system?
Possibly, but compatibility must be verified. Voltage, power supply capacity, connector type, control method, wattage, and environmental requirements all need to agree.
Are hardscape lights the same as path lights?
No. Hardscape fixtures generally mount within or against a constructed surface, while path lights commonly stand above the ground to cast light downward. Their mounting, wiring, and optical patterns can differ substantially.
Do all outdoor lights withstand direct rain?
No. Outdoor products can have different permitted locations and exposure ratings. Use the exact product documentation to confirm wet-location suitability and the approved mounting orientation.