SEMCO Titan Shield Gloss is a single-component, water-based polyurethane hybrid sealer that dries to a tough, UV-stable gloss film. It's for garage floors, driveways, pool decks, pavers and polished concrete, and it's the topcoat over Liquid Membrane and PreStain. It seals and hardens in one product, with no separate primer.
Where to use it
- Garage floors: Takes foot and vehicle traffic. Mix in Non-Skid Additive where floors get wet.
- Driveways & walkways: A gloss finish that rejuvenates faded concrete and pavers and stands up to weather.
- Pool decks: Seals and helps reduce surface heat. Add Non-Skid for wet, bare feet.
- Pavers, block & stamped: Brings out the color of pavers, block and stamped or decorative concrete.
- Interior & polished floors: UV stable and water-based, for basements, shops and polished concrete.
- Over Liquid Membrane & PreStain: The topcoat for both. Wait about 2 days after the last membrane coat.
Specifications
- Type: Single-component, water-based polyurethane hybrid
- Finish: Gloss
- Colors: Clear + 17 colors
- Coverage: ~150 sq ft per gallon at 3 coats
- Coats: 3 minimum, about 6–8 mil each
- Dry between coats: 30–45 min, up to 2 hours if humid
- Full cure: ~48 hours at 72°F
- Temperature: Not over 90°F, out of direct afternoon sun
- Max surface moisture: 3%
- Tools: Woven roller or airless sprayer (17 tip)
- Traffic: Foot, chemical and vehicle
- Cleanup: Warm water, straight after use
Download the technical data sheet (PDF)
Made in the USA by SEMCO, 35+ years in surface coatings. Questions? Call 1-833-211-2297.
